FUJI FILM FCR_CAPSULA-XLII

Rapid processing and precise image reading ideal for X-ray images including mammograms

Introducing a newly upgraded FCR CAPSULA XL II designed with a new form and equipped with state-of-the-art functions including an optional capability of 50-micron reading with high resolution imaging plates (HR-V and HR-VI).

Features

One of the FCR key components is an Imaging Plate, or IP, that is used in place of X-ray film to easily digitize X-ray images. The FCR CAPSULA XLII features the IP in an unprecedented compact frame, as it incorporates over 70 years of Fujifilm's extensive technology and know-how.

CAPSULA, meaning small box in Latin, has been cleverly trimmed to be smaller and lighter, boosting flexibility on installation and layout, while maintaining the specifications for a broad range of diagnostic imaging needs from general radiography to pantomography. Plus, the optional capability of 50-micron reading with the HR-V or HR-VI can be utilized to visualize finer and more minute structures for better diagnosis.

Compact with high efficiency

FCR CAPSULA XLII enables extremely high throughput of up to approximately 94 IPs/hr.* and the time to display the image on the CR Console monitor is approximately 23 sec., in spite of its compactness.

 

Specifications

Standard Components	FCR CAPSULA XLII Image Reader Unit (Model: CR-IR 359) AC power cord
Other System Components	Optional upgrade kit for 50-micron reading with HR-V or HR-VI IP cassette type CC, LC, CH CR Console, CONSOLE ADVANCE*, AWS-c Dry Imager: DRYPIX 2000, 4000, 7000
Supplies	Imaging Plate: ST-VI: 35 × 43 cm (14″ × 17″), 35 × 35 cm (14″ × 14″), 10″ × 12″, 8″ × 10″, 24 × 30 cm, 18 × 24 cm, 15 × 30 cm HR-V: 24 × 30 cm**, 18 × 24 cm*** HR-VI: 24 × 30 cm**, 18 × 24 cm*** IP Cassette: Type CC: 35 × 43 cm (14″ × 17″), 35 × 35 cm (14″ × 14″), 10″ × 12″, 8″ × 10″, 24 × 30 cm, 18 × 24 cm, 15 × 30 cm Type LC: 35.4 × 124.5 cm, 35.4 × 101.7 cm, 35.4 × 83.7 cm, 25.2 × 58 cm, 24 × 57 cm Type CH: 24 × 30 cm**, 18 × 24 cm*** (For 50-micron reading with HR-V or HR-VI)
Number of Stacker	1
Reading Gray Scale	12 bits
Network	10 Base T / 100 Base TX
Dimensions (W × D × H)	590 × 380 × 810 mm (23″ × 15″ × 32″)
Weight	99 kg (218 lbs.)
Power Supply Conditions	Single phase 50 - 60 Hz AC 120 - 240 V ±10% 5 A (max)
Environmental Conditions	Operating Conditions: Temperature: 15 - 30 °C Humidity: 40 - 80 % RH (No dew condensation) Non-operating Conditions: Temperature: 0-45 °C Humidity: 10 - 90 % RH (No dew condensation)

Time Required for IP Feed / Load:

IP Type		Required Time
ST-VI	35 × 43 cm (14″ × 17″)	Approx. 58 (41) sec.
ST-VI	35 × 35cm (14″ × 14″)	Approx. 52 (38) sec.
ST-VI	10″ × 12″	Approx. 49 sec.
ST-VI	8″ × 10″	Approx. 41 sec.
ST-VI	24 × 30 cm	Approx. 48 sec.
ST-VI	18 × 24 cm	Approx. 39 sec.
ST-VI	15 × 30 cm	Approx. 49 sec.
HR-V	24 × 30 cm**	Approx. 59 sec.
HR-V	18 × 24 cm***	Approx. 51 sec.
HR-VI	24 × 30 cm**	Approx. 59 sec.
HR-VI	18 × 24 cm***	Approx. 51 sec.

• Under “Required Time” in the table above, figures in parentheses are at high-speed mode.
• Image erase time on IP is directly related to the exposure made. It is assumed to be at 25 mR for ST-VI and 600 mR for HR-V.
• The performance described above shows typical values. It varies depending on the exposure level.

Processing Capacity

IP Type		Required Time
ST-VI	35 × 43 cm (14″ × 17″)	Approx. 62 (87) IPs / hr.
ST-VI	35 × 35cm (14″ × 14″)	Approx. 70 (94) IPs / hr.
ST-VI	10″ × 12″	Approx. 73 IPs / hr.
ST-VI	8″ × 10″	Approx. 87 IPs / hr.
ST-VI	24 × 30 cm	Approx. 75 IPs / hr.
ST-VI	18 × 24 cm	Approx. 92 IPs / hr.
ST-VI	15 × 30 cm	Approx. 73 IPs / hr.
HR-V	24 × 30 cm**	Approx. 61 IPs / hr.
HR-V	18 × 24 cm***	Approx. 70 IPs / hr.
HR-VI	24 × 30 cm**	Approx. 61 IPs / hr.
HR-VI	18 × 24 cm***	Approx. 70 IPs / hr.

• Figures in parentheses and conditions are the same as those of “Time Required for IP Feed / Load”.
• The time required to change the cassette is assumed to be 0 (zero) seconds.

Time to Display on CR Console:

• Approx. 42 sec. in case of 35 × 43 cm (ST-VI) with 100-micron reading
• Approx. 32 sec. in case of 18 × 24 cm (HR-V)*** with 50-micron reading

Time to Print on DRYPIX 4000 through network via CR Console:

• Approx. 145 sec. in case of 35 × 43 cm (ST-VI) with 100-micron reading
• Approx. 140 sec. in case of 18 × 24 cm (HR-V)*** with 50-micron reading